Anchor bend

The Roringstek is a knot for attaching a rope to an anchor ring ( Roring ).

Application

The Roringstek is mainly used for permanently joining a leash with a ring. In addition, Verholleine, anchor rope and Tripp or Warpleine can also be attached to round smooth objects ( logs, sticks ). Rings that hang vertically on the harbor wall, come on every train with each wave in the horizontal and so chafe the line through. The Roringstek has the advantage that it clamps on the ring and does not chafe. He is, however, difficult to solve if he has been under heavy train.

Tie

With the end of the rope two loose round trips are made ​​through the ring. With the free end, go around the fixed end and plugged it from the side on which the fixed end is through both round trips and pulls node securely. The double overhand knot is, in principle, this node basis.

Finished

In the other direction on a rod

The rod is withdrawn, it can be seen that there is a double overhand knot.

Alternatives

• Linen under train to be tied with a half Rundtörn with two half hitches.
• An immovable rings or articles of bowline is suitable.
• Believed to be no longer solve the node, use the double Roringstek.
• If the node does not slip sideways on a pole, the Stopperstek is suitable.

• Modification

Double Roringstek

• If you drive to the end twice through the two round trips, creating a Double Roringstek.