QorIQ

QorIQ is, a series of microcontrollers with PowerPC architecture Freescale Semiconductor. It consists of five product families P1 -P5, all of which rest on the e500 processor core, or its successors. You will find in embedded systems, above all as a network device (router, switch) use.

Technology

P1

The P1 series is equipped with Gigabit Ethernet controllers, two USB 2.0 controllers, a 32 -bit DDR2 and DDR3 RAM controller with ECC support, two quad - direct memory access (DMA ) controllers, and SerDes, which as PCI Express and SGMII high-speed interface can be configured equipped. The chip fit a 689 -pin housing, which is pin-compatible with the P2 series.

• Freescale Announces pin -compatible, power -efficient series in new QorIQ communications platforms - Freescale.com

P2

The P2 models have standard 512 kB L2 cache, a cryptography engine, three Gigabit Ethernet controller, a USB 2.0 controller, a 64 -bit DDR2 and DDR3 RAM controller with ECC support, two quad - direct memory access (DMA ) controllers and SERDES that can be configured as PCI Express three, two or SGMII RapidIO two high speed interfaces. The chips have the same case as the P1 series.

• P2010 - 1 1.2 GHz Core
• P2020 - 2 1.2 GHz cores
• Freescale Announces pin -compatible, power -efficient series in new QorIQ communications platforms - Freescale.com
• P2040
• P2041

P3

The P3 series has L3 cache, DUART, GPIO and USB 2.0, cryptographic modules, and a SerDes connection with 18 lanes that can be configured as Gigabit Ethernet, 10 Gigabit Ethernet, RapidIO or PCI Express. The series P3 -5 share the same housing.

P4

The P4 - P3 series is identical to the series, except for the higher power.

• P4080 - 8 e500mc cores with 128 KB L2 cache and 1MB L3 cache, two for each of the two 64 -bit DDR2/DDR3 memory controller. The controller consumes less than 30W
• Eight -core microprocessor from Freescale redefines state-of -the- art for embedded multicore processing - Freescale.com

P5

The P5 series uses 64 -bit e5500 cores with up to 2.5 GHz, but otherwise it is backward compatible to P3 and P4.

• P5010 - 1 e5500 2.0 GHz core, a MB L3 cache, a DDR3 controller, at 45 nm feature size produced 30W power consumption.
• P5020 - 2 e5500 2.0 GHz cores, two 1 MB L3 cache, two DDR3 controller, manufactured at 45 nm feature size 30W power consumption.
• P5021 - 2 e5500 2.4 GHz cores, 1.6 GHz DDR3/3L, 10x1 GbE, 2x10 GbE.
• P5040 - 4 e5500 2.4 GHz cores, 1.6 GHz DDR3/3L, 10x1 GbE, 2x10 GbE.

AMP

The AMP microcontrollers are all based on the 64- bittigen e6500 core with AltiVec support. The clock frequency ranges up to 2.5 Ghz, the chips will be manufactured in a 28 nm production process.

• T4240 - 12 e6500 dual -threaded cores, 3 memory controller